Nobody buys a boat because they wanted another sensible financial decision, but that does not mean you should let your pride and joy turn into a moldy, rodent-infested eyesore by the time spring rolls around. If you are parking your rig outside for the winter, shrink wrap is the gold standard for keeping the elements at bay. It is essentially a custom-fit plastic suit that keeps snow, ice, and UV rays from wrecking your gelcoat and upholstery. Before you start, make sure you have handled your boat maintenance and engine winterization. Shrink wrap is a cover, not a magic spell that fixes a neglected cooling system.
The Prep Work
Clean your boat thoroughly well in advance of the wrap date. Covering a wet or dirty boat is a recipe for a mildew-filled surprise come April. Wash your hull, deck, and topsides with a marine-grade soap, then let everything dry for at least 24 hours. Dirt, grime, and salt trapped under the plastic can cause corrosion and staining. Remove antennas, flag poles, and anything else that could poke a hole in the plastic. If you have sharp rails or hardware, use corner and edge protectors to prevent punctures. If you are doing this yourself, remember that you are working with open flames and high heat. Keep a fire extinguisher handy, and never point your heat gun at fuel tanks, batteries, or your own feet.
Framing and Wrapping
If you just pull plastic over a boat, you are going to have massive voids and sagging spots where snow will pool and eventually tear through. You need a support structure. Use a system of straps and poles to create a tent-like frame that allows snow to shed off the sides. Once the frame is set, pull the wrap over the boat. You want a single, seamless piece if possible. If you have to use two pieces, join them with specialized shrink wrap tape and heat to ensure a watertight seal. Secure the wrap to a perimeter strap that runs around the hull, then use your heat gun to shrink the material until it is drum-tight. Start at the bottom and work your way up; the heat rises, which helps the process along.
The Ventilation Factor
A sealed boat is a greenhouse for mold. If you do not vent it, you are essentially steaming your interior all winter. You need cross-flow ventilation to keep the air moving. Install multiple vents, especially near the bow and stern. If you are storing a wooden boat, you need even more airflow, as these vessels are particularly prone to rot when trapped in a damp, steamy environment. Consider placing moisture absorbers inside the cabin to help manage the humidity levels. If you are storing your boat on a trailer, ensure it is properly supported and level. For larger vessels, you will likely be on blocks. Always check with your marinas regarding their specific storage rules, as some facilities have strict requirements for how and where you can wrap your boat.
Mid-Winter Check-Ins
Do not just walk away until spring. Mid-winter inspections are mandatory. Heavy snow loads can tear the wrap, and rodents are surprisingly good at finding a way in. A quick walk-around to clear off heavy snow and check for punctures can save you a massive headache when it is time to get back to sandbar life. If you do find a hole, do not panic; use a patch repair kit to seal it up immediately. If you are not confident in your ability to handle the heat gun or the structural framing, hire a pro. Expect to pay anywhere from $15 to $25 per linear foot for professional service, but for a high-end boat, it is a small price to pay to ensure your investment survives the off-season unscathed.
Ready To Find Your Boat?
Our local boating partner, Munson Ski & Marine, is minutes from the Chain O’ Lakes. Explore boat dealership near Fox Lake or see boats for sale. The Walworth, WI showroom is a short drive from Lake Geneva boaters.








